This paper explores the use of a reading lamp as an access point for a Visible Light Communications (VLC) downlink channel. We have established an infrared uplink channel based on a network adapter, supporting both a VLC receiver and an infrared emitter. The optical signal power distribution over the passenger area has been also studied using a Monte Carlo Ray- Tracing algorithm. The hardware implementation and testing results are also presented.
Index Terms — Visible Light Communications, In-flight communications.
Offering data access during flight has recently become an area of interest for many plane building companies and airlines. Moreover, the availability of wireless bandwidth opens the door for new entertainment services such as video selection and collaborative games. While some networking companies are offering solutions for the plane- to-earth data link, others are providing Wi-Fi-based solutions to deal with compatibility problems with the flight instrumentation. However, the available baud rate for each user is limited and the EM compatibility problems are still present (not with the plane systems, but among other users when the amount of them increases). Other proposals are devoted to multimedia delivery inside the aircraft so as to provide seatback entertainment . Wireless optical communications is a way of reducing the overall system weight induced by wiring each passenger seat.
Wireless optical connectivity offers some advantages on a typical plane cabin as it has no EM concerns. The position of the passenger during flight is well defined: s/he is usually placed on a seat with a reading lamp pointing to her/his position at a distance of about 1.5 m, and having a data device
1 This research has been funded in part by the Spanish Science & Innovation Ministry (Project COLIBRI TEC2009-14059 -C03-01) and the Canary Islands Regional Government Project ICARO ProID20100117). C. Quintana has been awarded a PhD. grant of the Canary Islands Research Administration (ACIISI).
C. Quintana is with the Institute for Technological Development and Innovation in Communications (IDeTIC), Spain (e-mail: [email protected]).
V. Guerra is with the Institute for Technological Development and Innovation in Communications (IDeTIC), Spain (e-mail: [email protected]).
J. Rufo is with the Institute for Technological Development and Innovation in Communications (IDeTIC), Spain (e-mail: [email protected]).
J. Rabadan is with the Institute for Technological Development and Innovation in Communications (IDeTIC), Spain (e-mail: [email protected]). R. Perez-Jimenez is with the Institute for Technological Development and Innovation in Communications (IDeTIC) Spain, (e-mail: [email protected]).
(laptop, tablet or phone) over the table. The coverage area of a typical infrared emitter pointing upwards has a diameter of about 50 cm, so focusing the uplink channel should be easy.
Furthermore, we shall employ an existing resource as the illumination lamp is always present. As the use of LEDs instead of other illumination sources does not present major regulation concerns, many plane providers appreciate their lifetime, low power consumption and chromaticity properties.
There are several research groups working in this area. M. Kavehrad has also studied theoretically the use of on-board power line networks for providing both electricity and communications by modulating LED lamps, while Elgala et al have proposed creating infrared communications cells to implement the user link . In previous works, we have presented how to solve the connection of the lamp with the Ethernet link and a first approach based on an USB connection . In this paper we propose a full optical wireless strategy for